AEG 18V to WEN 20V Battery Adapter
245,00 kr
Skip to product information
AEG 18V to WEN 20V Battery Adapter
245,00 kr
Taxes included.
kr 23.00 Shipping to DenmarkZero customs fees. Zero surprise taxes.
Safety feature
Built-in BMS Protection
Integrated Battery Management System (BMS) helps prevent battery over-discharge and improves safety.
Use your AEG 18V batteries on WEN 20V cordless tools, without buying into a second battery platform. The battery side is injection-molded ABS and the tool interface is high-precision 3D-printed ABS for an accurate fit, with pure copper contacts carrying the current. One battery platform across more tools means less spent on batteries and less to keep charged. It also carries battery protection electronics (BMS) inside.
Specifications
- SKU
- PTA-AEG18-WEN20
- Fits this battery
- AEG 18V (Lithium-Ion)
- Battery voltage
- 18V
- Runs these tools
- WEN 20V (Lithium-Ion)
- Tool voltage
- 20V
- Housing
- ABS
- Terminals
- Copper
- Current rating
- 40A continuous (80A peak at 18VDC for up to 2 seconds)720 Watt continuous at 18V nominal
- Internal wiring
- 5 mm²
- Weight
- 127 g (4.5 oz / 0.28 lb)
- Colour
- Black, Orange
- Operating humidity
- 5–95% RH
- Operating temperature
- -10 °C to 50 °C (14 °F to 122 °F)
- USB port
- No
- Built-in BMS protection
- Yes
- What's in the box
- Battery Adapter
- Warranty
- 12 months after the date of deliveryMore details
- Revision
- Revision 01 (released on August 17, 2025)
Why choose this adapter
- A Battery Management System inside the adapter cuts power before the battery is drained too far — protection your battery may not have on its own.
- Solid copper terminals, so less of the current is lost as heat.
- 5 mm² internal wiring, rated for 40A continuous with 80A peak at 18VDC for up to 2 seconds, so a high-draw tool is not held back by the adapter.
- Covered by a 12-month warranty from the day it arrives.
AEG 18V and WEN 20V compatibility
It works in one direction only: AEG batteries powering WEN tools. For the opposite pairing, see adapters that run on WEN 20V batteries.
Compatibility can vary with the exact battery and tool model. Before ordering, confirm that your battery belongs to the AEG 18V platform and that your tool takes WEN 20V batteries.
Important charging and safety information
This adapter is for powering cordless tools and nothing else. It cannot charge AEG or WEN batteries and must never be connected to a charger of any kind. Always take the battery out of the adapter before charging, and charge it on the original charger made for your AEG 18V battery.
How it works
-
1. Use the battery you own
Any compatible AEG 18V battery you already have.
-
2. Slide on the adapter
It goes where the original WEN 20V battery sits.
-
3. Click in and work
No tools, no wiring, no modifications.
AEG 18V to WEN 20V — Common Questions
Will my WEN 20V tool run as long on a AEG 18V battery?
Runtime comes from the battery, not the adapter — a 5.0Ah AEG 18V battery lasts roughly twice as long as a 2.5Ah one, exactly as it would on its own tool. The adapter’s copper terminals and heavy-gauge wiring are there to keep resistive loss low.
Could this damage my AEG 18V battery or my WEN 20V tool?
Used with undamaged, compatible equipment it is not expected to. This adapter has its own Battery Management System, which cuts power before the battery is drained too far, so it protects the battery even where the battery has no protection of its own. Stop using it if the adapter becomes unusually hot, the contacts look damaged, or the tool behaves oddly.
Can I charge through the adapter?
No, and it should never be attempted. The adapter carries power one way only, out to the WEN 20V tool — there is no charging circuit inside it. Connecting it to a charger puts the battery, the charger and the adapter at risk. Always take the AEG 18V battery off the adapter and charge it on its own charger.
Does it work with third-party AEG batteries?
Usually. What matters is the socket, not the badge: if the battery slides on and locks the way an original does, the adapter takes it and the WEN 20V tool runs. Aftermarket moulding does vary, so if yours looks unusual send us a photo and we will check before you order.
How much does it add to the WEN 20V tool?
127 g (4.5 oz) and a short extension between battery and tool. You notice it overhead or in a tight cabinet; on a drill or driver held normally it disappears.
Customer reviews
No reviews for this adapter yet — yours would be the first.